Menu

Universal Aqua Ghana Limited

Your trusted water partner

Iron & Manganese Removal Water Filter

Iron and manganese water filters are for use with potable water to reduce levels of iron and manganese.

Water containing high levels of iron and manganese can be unpleasant both in taste and appearance often causing staining of baths, basins and clothes. Drinking water with elevated manganese levels can, in the long term, cause a manganese build-up in your system.

To deal effectively with these issues a large cylinder, allowing good contact time is essential with an automatic back wash valve so the unit can clean itself.

Types of treatment media and equipment will vary according to the levels of iron or manganese, type of iron, daily water usage and other water parameters. A water quality test report should be obtained to ensure the appropriate equipment is suggested.

We can assemble, build and install range of iron and manganese systems using different backwash heads and filtration media to ensure the best and most cost effective solution is available.

NB: Where pH level is low, a pH correction unit should be fitted before this unit to bring the pH up to neutral.
Where water appears clean at source but discolours when standing, an aerator unit may be necessary.

Please email us at joseph@universalaquaghana for a free quote on a system to suit your requirements. 

Iron And Manganese Reduction Unit With PP Back Wash

alt

Product DetailSpecification

Type: Iron and manganese reduction unit with manual head

For use with potable water to reduce levels of iron and manganese.

Our Iron and Manganese units include ABS lined cylinder, Automatic back wash valve. 2.5m drain hose.

This is a filter for essentially low contamination levels.

Pressure: 30-100 psi
Temp: Cold water use only. Must not freeze.
Port size: 1" bsp male
Electrical rating: 240V 50Hz

Height:

Diameter: 10"

Drain connection: 1/2 inch

For use with potable water to reduce levels of iron and manganese.

Our Iron and Manganese units include ABS lined cylinder, Automatic back wash valve. 2.5m drain hose.

Please note:

  • Where water pH level is below 6.5, for best results a  pH correction unit should be fitted before this filter.
  • Where water appears clean at source, but discolours when left standing, a valve to aerate the water should be fitted before this filter.